Amara Holdings Limited

The company owns hotels and the different others residential as well as the commercial properties throughout different parts of the Southeast Asia. One of its hotels in Saigon was sold in the year 2008 (Amaraholdings.com, 2016). The current trends throughout the market segments revealed that the demands of the properties are increasing in large numbers and the firm has the interest in two of the office buildings, five specialty restaurants, a shopping complex, three apartments and different residential properties.Moreover, the firm is looking forward to its expansion throughout different geographical areas with the help of developing and capturing new properties. The firm was incorporated in the year 1970 and traced its roots in the 1930s. Some of the top competitors of the firm are Keppel Corporation limited, Hotel properties limited and Wheelock properties limited.   Sales have been considered to be one of the most crucial factors which help in the establishment of any of the firm concerned.  Ã‚   There need to be effective strategies from the firm in order to entry into the new market segments for establishing its business processes (Ryz?ko, 2011). The pricing from the competitors and the selection of the geographical location for the development of the properties plays a major role in increasing the profitability in this particular industry. Therefore, Amara Holdings Limited  is planning to capture different locations in order to enhance the growth and the expansion of the business processes of the firm. Amaraholdings.com. (2016).  Amara Holdings. [online] Available at: https://www.amaraholdings.com/ [Accessed 13 Nov. 2016]. Ryzko, D. (2011).  Emerging intelligent technologies in the industry. 1st ed. Berlin: Springer.

The East India Decline in year 1833 Essay Example | Topics and Well Written Essays - 2250 words

The East India Decline in year 1833 - Essay Example This paper accounts for the decline of the East India Company in light of the political and commercial influences occurring in the Year 1833. It considers the fall in the East India Company with specific concern Charter Act 1833 It considers the fall in the East India Company with specific concern Charter Act 1833. The East India Decline in year 1833: Â § Introduction The East India Company was perhaps among the most powerful commercial organization that the world had ever witnessed. In its heyday it not only had monopoly on British trade with Far East and India but it was even responsible for the government of already vast Indian sub-continent. All of these factors meant that the British East India Company marked a greater historical event. The East India Company came into being in 1600 before collapsing completely in 1858 this was the phase when the Company was taken over under the direct control of Great British government. There are a number of reasons that contributed towards t he decline of the Company and eventually it being taken over. The decline of this megalomaniacal commercial entity was already destined by its own actions as far back as the mid-eighteenth century These include the short term factors such as the Indian Sepoy Mutiny as well as the other long term factors such as the internal mal administration of the Company (which had taken birth earlier than 1833), the ever increasing power of British government and to some lesser extent this can even be attributed to the change in public opinion over time. Charter Act 1833 Reform Act The period that had followed the enactment of the great Charter Act of 1833 witnessed very great change in England. (The Richest East India Merchant: The Life and Business of John Palmer of Calcutta, 1767-1836.) The industrial revolution had actually a greater impact in England. In the year 1830, the time when the Whigs came into super power in the wider political scenario of England, this opened a way of the triumph for the liberal principles. Consequently, the Reform Act was passed in the annual year 1832. (Reform Bill actually came into being by Parliament in June 1832. The Bill actually was directed against the political monopoly of the financial aristocracy and landed gave representatives of such industrial bourgeoisie access to the Parliament. However, the proletariat and petty bourgeoisie, the main forces towards the struggle for the reform had gained no electoral rights. ) The Reform Act with that the concepts of laissez faire and the rights of men were then duly emphasized. Introduction of Laissez Faire Laissez faire is a kind of style that is positive only in condition where the workers are very responsible and in the case of creative jobs where any person is thereby guided by his own aspirations. In such cases, less direction would be required so this style could have acted better. This was the kind of style where most people don't like someone looking over their shoulder of responsib ility, in that manner laissez faire style would promote a sense of trust in the workers. This style has more disadvantages this is due to the view that it is imposed as the lack of interest of the leader that leads to him being adopting this style. It just proves that there is an ineffective or poor management which makes the workers lose their sense of direction, purpose and focus. The disinterest of the leadership and management causes the workers to become less interested in their work and their dissatisfaction even increases. A laissez faire management might makes it easier for workers to do substandard job or to slack it off entirely but that usually cause a very high visibility problem to bring such workers to a lighter situation. Laissez faire, or a sort of hands off style of the governing, can lead to lots of corruption and anarchy. Many

The member of the wedding Essay Example | Topics and Well Written Essays - 1750 words

The member of the wedding - Essay Example Jasmine and proceeds to try grown up things, like going to a bar and drinking, making a date with a much older military man, and dresses nicely with perfume. It is noticeable that both of these personas – Frankie and F. Jasmine – have the same obsession, which is to leave the town. In the end, Frankie seems to settle into her own identity of who she is in that moment, which is neither a boy, a woman, nor an adult, but is, in fact, an adolescent girl and it is only then that Frankie stops obsessing about leaving the town and settles into the normal life of schoolwork and hanging out with a best friend. Frankie Addams, while ostensibly a tomboy is also confused, as she is perched on the boundaries of childhood and adulthood, as well as straddling the lines between masculinity and femininity, while being subjected to sexuality that is presumably beyond her tender years. The masculine/feminine dichotomy is shown by the fact that Frankie has a boy’s name, and is, by all accounts, a tomboy, yet also puts on Sweet Serenade perfume (White, 1985, p. 89). In one scene, Frankie is cussing like a man, and threatening to shoot every person who said that she â€Å"smelled bad† with a pistol, then John Henry repeats that Frankie smelled like â€Å"a hundred flowers† because of her perfume (McCullers, 1946, pp. 610-611). The feminine side is further shown when Frankie dreams about changing her name to F. Jasmine Addams (McCullers, 1946, p. 616), although this name is still a blend of the masculine and feminine. The Jasmine part is definitively feminine. Yet calling herself à ¢â‚¬Å"F. Jasmine Addams† denotes a certain sound of masculinity. According to Groba (1994), in quoting Simon de Beauvoir, this is to be expected when young girls who rebel against society and refuses to accept the roles that others have thrust upon her, yet does not have the courage to completely repudiate the roles. This leads the young girl to either take flight from reality, as

Microsoft's Business Strategy Essay Example | Topics and Well Written Essays - 750 words

Microsoft's Business Strategy - Essay Example Google has revolutionized the aspect of using a range of online sources such as books, journal, directories and others. Even it has the first mover advantage due to technological leadership in the search engine category and Google’s employees are always suggesting innovative ideas for enhancing the firm’s performance in the market so that it can remain competent and a market leader. It is evident from the case that Microsoft has undertaken a range of initiatives for giving a tough competition to the players in the search engine domain. Despite all of its efforts, it has been unable to offer the services in alignment with the demands of the customers. However, it is still considered to be the dominant company in hardware and software category as it is the pioneer of developing Operating Systems for providing a diverse range of tools to the customers. In order to excel in the search engine market, Microsoft tried to distinguish the Live Search feature so that it can meet the expectations of the customers effectively. Some of the efforts undertaken by the company comprised of integrating internal search service with Microsoft Encarta Encyclopedia, changing the service name from ‘MSN Search’ to ‘Live Search’, development of Live Search Club, Live Search provided the advertisers an opportunity of gathering information about user’s demographics in addition to the query, creation of ‘Opinion index’ for providing reviews about the latest products, introduction of cashback program and many more. The ongoing endeavors of Microsoft’s development team shows that it is keen towards dominating the search engine market, however, it is lagging behind due to rapid advancements done by Google. As it is evident that the users develop loyalty with the companies having first mover advantage, Microsoft will have to look for avenues which are untouched by the market leader. Even the

Controller Area Network Sensors: Applications in Automobiles

Controller Area Network Sensors: Applications in Automobiles 1: Introduction In this paper an overview on the Controller area network sensors and their real world application in the automobiles is presented to the reader. The fact that controller area networks employ various sensors and actuators to monitor the overall performance of a car (K.H. Johansson et al, 2001[1]), this paper focuses only on the sensors and their role in supporting the CAN performance. 2: Laser Speed Velocimetry (LSV) sensor The application of this sensor is present in the Reanult range of vehicles where the company is incorporating the LSV as an on-board sensor to measure ground speed with better than 0.1km/h accuracy (LM Info, 2006[2]). The LSV technology is an approach to measure ground speed of a moving automobile with greater accuracy thus ensuring better on the road performance as argued by K.H. Johansson et al (2001). The purpose of the technology is to measure real-time speed of an automobile at accuracy level of 0.1km/h.The technology behind the LSV system comprises of the sensor that continuously records the interference with the motion surface that is fed back to the controller in the system that measures the speed of the car. The diagram in fig 1 below explains the aforementioned effectively. The above is the schematic representation of the mounting of the LSV 065 sensor head (Source: www.polytech.com). The above diagram further clarifies that the use of the LSV system not only provides an effective and accurate measurement of the speed but also proves that the use of this system can provide an effective control over the performance and over the velocity of an automobile. The LSV systems from Polytech, the schematic for which was presented in this section â€Å"combine a sensor head, a controller and software into a rugged industrial package that makes precision measurements from standstill to speeds of more than 7,200 m/min in either direction† (LM INFOR Special Issue, 2006). 2: Braking System sensors and Speed sensors The ABS system utilizes multiple sensors to prevent the wheels from locking whilst braking at high speeds. The main sensors used in this set-up are 2.1: Speed sensor The speed sensor is the sensor that is fitted to each wheel of the automobile. The purpose of the sensor is to identify the wheel slip whilst braking which is then fed back to the ABS controller unit to control. The speed sensor records the speed of the rotation of the wheel and when one or more of the wheels are recorded to be rotating at a considerably lower speed then the ABS control unit reduces the pressure on the pressure valves thus ensuring that the braking does not lock the wheel. The speed sensor equipment comprises of various models and can be mounted on different positions of an automobile in facilitating the measurement of the speed. The application of the speed sensor in the ABS is one of the many applications of speed measurement. The ECM method of measuring the speed using speed sensors is increasingly popular as part of the ABS technology. It is also argued as the later version of ABS that overcomes the fundamental sensor positioning related flaws in the ABS system. The ECM uses the Pulse Code Modulation technique to communicate with the sensor and the control system of the Controller Area Network of the automobile. From the figure above it is clear that the ECM plays a critical role as the controller to capture the sensor signals and transmit to the master controller area network Electronic Control Unit (ECU) for overall control of the automobile. It is also evident that the sensor plays a vital role in the speed measurement and efficient operation of the ABS braking system. The fundamental difference between the VSS and the WSS is that the VSS is part of the controller area network and is connected directly to the ECU of the network whilst the WSS feeds into the ABS controller unit that is connected to the CAN of the car or automobile under consideration. The VSS is also a successful and flexible method for motorbikes and other two-wheeled vehicles as the mounting is simpler compared to the WSS mounting for ABS system that is popular in a car. The cases of VSS mounted in transaxle and the transmission serve effectively for the purpose of velocity measurement and also provides near accurate readings for the efficient speed control by the driver of the car or the rider of the bike. In the case of the VSS mounted in the transmission, the sensor sends a 4 pulse signal at regular intervals to the combination meter that then sends the signal to the ECU of the CAN in the car. The signal so sent is recorded as the speed and shown to the driver as the velocity of the car. This approach is more accurate to the traditional analogue approach to the speed measurement and management. The above schematic makes it clear that although the mounting of the sensor on the transaxle provides an efficient method of measuring velocity, the response of the sensor can be damaged due to the mechanical wear and tear that is directly associated with the transaxle in a car. The VSS mounted in the transmission is perceived to have resolved the issue through the mounting of the sensor near the core rotor and using a magnetic field to hold the sensor in position. This approach agreed to the more effective compared to the former where the mechanical wear and tear was a critical drawback to the overall performance of the system. The schematic mounting of the VSS in the transmission is presented in the fig 4 below. The above mounting schematic in the figure further justifies that the positioning of the sensor by the rotor will help measure the speed effectively and more accurately 3: Differential Hall effect Sensors Daniel Dwyer (2007)[3] argues that the differential Hall effect sensors are not only capable of accurately measuring speed but also providing the safety measures through effectively controlling the speed. The hall effect sensors utilize the fundamental principle behind the Hall Effect which is described as follows â€Å"When a bias voltage is applied to the silicon plate via two current contacts, an electric field is created and a current is forced.† †¦ Daniel Dwyer (2007). This principle is utilized in the gear tooth profiling and speed measurement through the gear tooth sensing both in the linear and the differential cases. The differential case is argued as a more successful element especially in case of the automatic transmission automobiles because of the need to effectively control the speed associated with the car. Another interesting element with the differential Hall-effect sensors is the fact that the sensor positioning is robust in nature and its wear and tear is minimal. The differential element sensing that is the key for the differential Hall effect sensors utilizes the fundamental Hall effect. Alongside the sensor also â€Å"eliminates the undesired effects of the back-biased field through the process of subtraction.† (Daniel Dwyer (2007). The differential baseline field for the sensor is made close to zero gauss since each of the two Hall elements in on the IC (the sensor) approximately see the same back-biased field as argued by Daniel Dwyer (2007). A schematic representation of the differential element sensing is presented in fig 5 below. The major feature of the Differential Hall effect sensor is the production in the form of an integrated circuit that can respond to the magnetic field interference and differential effects due to the change in speed and the gear tooth positioning in the magnetic field. The differential element sensing and the speed measurement is accomplished through the overall peak holding of the Integrated Circuit (IC) in the field. Although the traditional peak-detecting scheme could resolve the issue of peak holding, the sensor requires an external capacitor for peak holding in order to effectively control the overall automobile speed. Since a large gain is required to generate a signal strong enough to overcome the air gap in the case of the hall effect sensor especially in the drawbacks associated with the timing accuracy and duty cycle performance in the slope of the magnetic signal strength as argued by Daniel Dwyer (2007). From the above arguments it is clear that the Hall effect sensor is a successful but expensive sensor to perform measurements and be programmed as part of the overall CAN of the automobile. Thus to conclude the research in this paper the four sensors that were discussed include The Laser Speed Velocimetry (LSV) sensor and an insight on the LSV 065 module as an example. This sensor proves to be successful and accurate speed measurement equipment but the mounting and safety related elements pose a big drawback for its commercial application. The Wheel speed sensor for the ABS in an automobile was then discussed followed by the analysis of the Velocity Speed Sensor. Finally the Differential Hall Effect sensor was discussed in the research paper. This sensor on the other hand can be mounted easily in an automobile and can perform effectively to provide accurate measurements but has higher cost liability and maintenance requirements making it a secondary choice to the traditional VSS And WSS sensors used in most of the cars. Footnotes [1] K.H. Johansson et al, (2001), Vehicle Applications of Controller Area Network, ARTIST2 Network of Excellence on Embedded Systems Design, [2] LM: INFO (2006), Toyota Motor Sales, U.S.A [3] Daniel Dwyer (2007), Differential Hall-effect sensors aid rotational speed control, Allegro MicroSystems, Inc

Disability Worldwide Essay -- Health, Diseases

INTRODUCTION When a person is growing inside of the womb, he or she automatically possess unique gifts or talents that could potentially change the way of life. Blessed with all their beautiful bodily features that operate towards perfection, love and acceptance from their families, peer groups, and communities surround them. They gain respect as individuals and can make their own decisions in life. However, that is not the case with all people. Some were born with one or no limbs, and they cannot function properly without assistance. Others with brain abnormalities, body disfigurement, and etcetera. Instead of earning respect from their community, they are targets for alienation, abuse, and social stigmatization. Disability is something they cannot rid themselves of: It is a part of them. The main goal of the disabled is for their communities to accept them as â€Å"unique individuals.† DEFINITION OF DISABILITY Disability is best defined as a â€Å"state of being disabled; deprivation or want of ability; absence of competent physical, intellectual, or moral power, means, fitness, and the like† (Webster Multilingual Dictionary, 2006). Not all disabilities resulted in birth; accidents or illnesses are one of the other reasons. LEVETICUS 21:17-23: BIBLICAL CONCEPT How does the bible interpret disability? In one passage referred to as ‘†Leviticus,† the Lord spoke: â€Å"Speak to Aaron, saying: No man of your descendants in succeeding generations, who has any defect, may approach to offer the bread of his God. For any man who has a defect shall not approach: a man blind or lame, who has a marred face or broken hand, or is hunchback or a dwarf, or a man who has a defect in his eye, or eczema or scab is an eunuch. No descendant of ... ...m from the center because they felt that it was not of use to him and his mother was home from the hospital to care for him. Nick told the staff that he spends the majority of his time in the bedroom and is carried upstairs without his wheelchair. His social worker has made many attempts to see Nick, but to no avail. Although the social worker and staff show great concern over Nick’s welfare, there was nothing they could do to assist him because he was no longer a minor and he had to be the one to make a complaint about his care or request alternative living arrangements. Despite the rules and regulations, some were meant to be broken in cases like this. It was as if the agency turned a blind eye to the situation or could not go beyond their job description. If the organizations, agencies, or families could or would not assist them, where else can they turn to?

Democracy in the United States and Great Britain Essay

Although the need for government to have leadership that provides direction is universal among states, the form that the government leadership assumes varies. Government structure varies significantly between the United States and Great Britain, despite that each is a democracy and share a common history. In fact, the common history of the United States and Great Britain suggests reasons to explain the broad differences between the governments of each respective state. In the wake of the American Revolution, the people of the United States rejected the forms and institutions, most notably a monarchy and Parliament, of British government as well as British sovereignty. Possessing a democratic presidential government, the United States has two separately elected agencies of government. The executive and legislative branches of the United States, the President and Congress, respectively, both derive their power from the people, whereas in Great Britain only the legislative branch, Parliament, derives its power from the people, as the executive is elected by Members of Parliament, thus effectively combining both branches within a single institution. The Parliamentary system in Great Britain and the Presidential system in the United States both have histories marked by an absence of abject failure, yet neither system can be considered truly perfect. Consequently, the analyst cannot conclude that either system is better; rather, he must recognize that there are merits and faults in both systems. The Parliamentary system tends to legislate efficiently, whereas a presidential system tends toward gridlock. However, the presidential system grants both elected representatives and citizens greater influence in government. The Parliamentary system tends to favor Prime Ministers who have much experience, whereas the Presidential system favors Presidents who are responsive to the general will of the people. Also every week the British prime minister appears before the House of Commons and must answer questions put to him or her by the members of Parliament. Sometimes it is suggested that the president of the United States should be subject to similar questioning by members of Congress, as a way of encouraging closer interaction between president and Congress. If the president did so, however, it would be his or her choice; the president is elected directly by the people and is answerable to the voters rather than the legislature. Whereas the prime minister has no choice because he or she is a member of Parliament and is directly accountable to that body. Herein lies a very basic difference between the presidential system of government as it exists in the United States and the parliamentary system that has evolved in Great Britain. Another point is that the framers of the U.S. Constitution adopted the principle first enunciated by the Baron de Montesquieu of separation of powers. They carefully spelled out the independence of the three branches of government: executive, legislative, and judicial. At the same time, however, they provided for a system in which some powers should be shared: Congress may pass laws, but the president can veto them; the president nominates certain public officials, but Congress must approve the appointments; and laws passed by Congress as well as executive actions are subject to judicial review. Thus the separation of powers is offset by what are sometimes called checks and balances. In a parliamentary system, by contrast, the legislature holds supreme power. The prime minister is chosen by members of the legislature (Parliament) from among their own number and in practice is the leader of the majority party in the legislature. The cabinet members must also belong to the legislature, where they are subject to the same kind of questioning that the prime minister experiences. If the prime minister loses the support of the majority in the legislature on a significant vote, he or she must resign, and elections are called immediately. Thus, whereas in the United States, elections are held at fixed intervals, in Britain and other parliamentary countries, they may occur at any time, the only restriction being (in  Britain) that they must be held at least once every five years. In Conclusion, the governments of Great Britain and the United States of America have many differences, they are, at the core, provides leadership and direction to their nation.